Power Volume Button Flex Cable Compatible with iPhone 13 6.1 Inch - On Off Side Key Ribbon with Pre-Installed Metal Bracket - No Soldering Repair Part

Package Contents: 1x Power and Volume Button Flex Cable (Pre-installed Metal Bracket) Compatible with iPhone 13 (6.1 inch) NOTE: Installation by a professional is recommended, we cannot be held responsible if damage is caused as a result of improper installation

• ADDRESSES DEAD OR STUCK POWER & VOLUME KEYS: When the side power button or the volume rocker stops responding, sticks, or double-triggers, a fatigued button flex is the primary suspect. This ribbon carries both signals, so one swap brings the side keys back together.
• PRE-INSTALLED METAL BRACKET — LESS FIDDLING: The retaining bracket is already mounted on the flex, so you skip the most drop-prone alignment step and seat the assembly straight into the frame.
• NO SOLDERING IRON REQUIRED: The flex connects to the logic board through a snap-down FPC connector — no solder joints, no board rework. Align the connector, press it home, and confirm each key clicks before resealing.
• BUILT FOR iPhone 13 (6.1") ONLY: Machined to the A2482 / A2631 / A2633 / A2634 / A2635 frame — connector position, screw holes, and button travel match the required layout. The 13 mini, 13 Pro, and 13 Pro Max use different flexes, so confirm you have the standard 13 before ordering.
• DIAGNOSE BEFORE YOU OPEN THE PHONE: (1) Test power and volume separately — one working while the other is dead points to the shared flex, not the board. (2) Force-restart to rule out a software freeze. (3) To finish the repair you'll also want a precision screwdriver set and a fresh screen adhesive seal for the display.